Plate Heat Exchanger - In-line Plate Heat Exchanger - Heat Exchanger Plates

Bowman In Line Plate Heat Exchangers consist of numerous 316 stainless steel heat transfer plates, two outer covers and four connections copper vacuum brazed together to form an integral unit.
Unlike other plate heat exchangers, they have a unique flow arrangement which enables the inlet and outlet connections to be axially in line. This means that they can be installed directly in pipe work without any change of direction.
Each fluid stream flows in a series through alternate plates. As a consequence the plate spacing is larger and internal velocities are higher than normally the case with this type of heat exchanger, thus rendering them less prone to fouling.
These heat exchangers are suitable for heating and cooling fluids that are compatible with the materials of construction, the optimum unit for any duty can be computer selected by telephone in a matter of minutes.
The in line plate heat exchanger should be mounted as shown above. The direction and side through which any fluid flows does not matter, but they must be connected for counter flow.
TypeDimensions & Technical SpecificationsWeightVolume per side
A mmB mmC mmD mmE mmF mmG BSPH mmK mmL mmM mmkglitre
5-Oct10650251⁄2''11241630.80.05
9-Oct10650251⁄2''11371630.90.11
13-Oct10650251⁄2''11501631.10.16
17-Oct10650251⁄2''11631631.20.21
21-Oct10650251⁄2''11761631.30.26
29-Oct10650251⁄2''1110316320.37
              
15-515975165737.5453⁄4''12342042.50.18
15-915975165737.5453⁄4''12542042.90.36
15-1315975165737.5453⁄4''12742043.35.54
15-1715975165737.5453⁄4''12942043.70.72
15-2115975165737.5453⁄4''121122044.10.9
15-2915975165737.5453⁄4''1215220451.27
              
20-5212100220750601''12452455.40.44
20-9212100220750601''12712456.10.88
20-13212100220750601''12972456.81.32
20-17212100220750601''121232457.61.76
20-21212100220750601''121492458.42.2
20-29212100220750601''1220124510.23.08
              
25-29265125275962.57511⁄41524928618.86.02
image2